I am looking for the best adhesive to bond a metal leg to a glass table top. The adhesive must be very strong since there are moving leaves that cause a high torque to the table-leg bond, and also it must be clear since the table top is glass and the adhesive will show. It may be difficult to use a thin layer since the leg and table top seem to have a slight gap, which makes me wonder if a disc of some clear, soft material should be placed between the leg and table top. Super glue did not work, and none of my searches have yielded a good answer.Adhesive for metal leg and glass table top? Needs high strength, and to dry clear. Super glue failed.?
you can get this compound that you mix together that's called SUPER MEND it comes in two containers that you mix equal parts of each ingredient. be careful because it get real hot when starting to work. it dries white and you have to use it right when it is real hot because it sets up fast but it is real strong stuff that will not give, break, bend or anything.Adhesive for metal leg and glass table top? Needs high strength, and to dry clear. Super glue failed.?
Glass, being nonporous is tough to get anything to stick to. Your best bet is a clear silicone adhesive, but even this will pull away. It will depend on how much surface area the leg has to stick to the glass as to how long it will last. The more you can increase this the better.
I would recommend a clear epoxy. Check the glue aisle at your local hardware store like Ace. Something like this Devcon 2-ton should work fine.
araldite is pretty good
Thursday, February 11, 2010
I'd like to know of an adhesive or paste that will stick on glass as a clear hard substance please.?
rear view mirrow adesive here is a list of differnt glues you can buy.
http://www.nextag.com/rear-view-mirror-a鈥?/a>I'd like to know of an adhesive or paste that will stick on glass as a clear hard substance please.?
Silicone based glues like E-6000 will be clear if thin, and are somewhat flexible once dry.
Clear ';cements'; will be clear, but won't be flexible.
Clear epoxy glues will be clear** but won't be flexible (though stronger than cements, especially for the ones with longer setting times).
**some could have a slight brownish or yellowish tinge (and most will if left in the sun or other UV light a long time, unless coated with a UV resistant polyurethane, etc.), but the 30-minute setting Devcon one is very clear, I hear
(Not sure what the ones intended for car mirrors are... probably an epoxy glue though.)
HTH,
Diane B.
http://www.nextag.com/rear-view-mirror-a鈥?/a>I'd like to know of an adhesive or paste that will stick on glass as a clear hard substance please.?
Silicone based glues like E-6000 will be clear if thin, and are somewhat flexible once dry.
Clear ';cements'; will be clear, but won't be flexible.
Clear epoxy glues will be clear** but won't be flexible (though stronger than cements, especially for the ones with longer setting times).
**some could have a slight brownish or yellowish tinge (and most will if left in the sun or other UV light a long time, unless coated with a UV resistant polyurethane, etc.), but the 30-minute setting Devcon one is very clear, I hear
(Not sure what the ones intended for car mirrors are... probably an epoxy glue though.)
HTH,
Diane B.
Does anyone have a source for 1';-3'; clear hot pink non-adhesive tape or streamers?
I am looking for something akin to hot pink/magenta cellophane, mylar, poly or saran, pre-cut into 1';-3'; strips at least 25 feet long, with no adhesive backing.
The color must be a deep pink, not red or purple, and the material must allow light to shine through it (translucent or transparant.)
PVC flagging tape would be ideal if it were more translucent. Cellophane or lighting gel plastic would work if it were thin strips instead of big sheets.
I need something I don't have to cut myself.Does anyone have a source for 1';-3'; clear hot pink non-adhesive tape or streamers?
I looked around for 2 days for this one.....nothing yet. So far your best bet is to buy the 24'; colored cellophane rolls that I'm sure you saw on your searches. Your challenge should be to work with that, but come up with a way to cut it the way you need it. If I knew how to post a drawing here I would. You need to make a wooden stand with a roll holder, like a butcher with butcher paper. But you need a hinged bar with razor tips in it that lowers and locks in place so when you pull on the sheet, it gets cut to width. Are you handy with making your own jigs?Does anyone have a source for 1';-3'; clear hot pink non-adhesive tape or streamers?
Sorry I had the answer for you till you said flagging tape needs to be more translucent.
Good luck, maybe try a different light source on the flagging...
The color must be a deep pink, not red or purple, and the material must allow light to shine through it (translucent or transparant.)
PVC flagging tape would be ideal if it were more translucent. Cellophane or lighting gel plastic would work if it were thin strips instead of big sheets.
I need something I don't have to cut myself.Does anyone have a source for 1';-3'; clear hot pink non-adhesive tape or streamers?
I looked around for 2 days for this one.....nothing yet. So far your best bet is to buy the 24'; colored cellophane rolls that I'm sure you saw on your searches. Your challenge should be to work with that, but come up with a way to cut it the way you need it. If I knew how to post a drawing here I would. You need to make a wooden stand with a roll holder, like a butcher with butcher paper. But you need a hinged bar with razor tips in it that lowers and locks in place so when you pull on the sheet, it gets cut to width. Are you handy with making your own jigs?Does anyone have a source for 1';-3'; clear hot pink non-adhesive tape or streamers?
Sorry I had the answer for you till you said flagging tape needs to be more translucent.
Good luck, maybe try a different light source on the flagging...
Adhesive bra or strapless/clear strap?
i have a backless yet low neck shirt, i was thinking an adhesive bra but it seems as though it would fall off easily, do you think im better off using a regular strapless/clear strap bra?Adhesive bra or strapless/clear strap?
The adhesive ones arent that good i find, a clear strap bra is what i would use,Adhesive bra or strapless/clear strap?
NEITHER. Stick ons are uncomfortable and serve no purpose. Clear straps are tacky, and strapless bras mishape you and give horrific visible bra lines. When the designer made that top, I can promise he or she didn't have a bra on the model walking down the runway. You are not supposed to wear a bra with it. I'll never understand American women's obsession with their nipples, as if the hint of them under your blouse will make men go crazy or blind or something. No other civilized country in the world has this odd obsession.
yh the clear strapped is best you can move as you like
The adhesive ones arent that good i find, a clear strap bra is what i would use,Adhesive bra or strapless/clear strap?
NEITHER. Stick ons are uncomfortable and serve no purpose. Clear straps are tacky, and strapless bras mishape you and give horrific visible bra lines. When the designer made that top, I can promise he or she didn't have a bra on the model walking down the runway. You are not supposed to wear a bra with it. I'll never understand American women's obsession with their nipples, as if the hint of them under your blouse will make men go crazy or blind or something. No other civilized country in the world has this odd obsession.
yh the clear strapped is best you can move as you like
Adhesive stickers that are a clear or white (about 1/2'; wide) with a small black dot (about 1/8';) in center
Do any such stickers exist?Adhesive stickers that are a clear or white (about 1/2'; wide) with a small black dot (about 1/8';) in center
Jason R
I'm sure they do exist. And I think I saw them at Biz-Mart or Office Depot or was that at Target? Mmmmmm . . . .
Jason R
I'm sure they do exist. And I think I saw them at Biz-Mart or Office Depot or was that at Target? Mmmmmm . . . .
I am seeking clear, self-adhesive laminating sheets (cheap), non-machine, that you can peel off &stick?
I used to buy them in stores like K-Mart when I was young back in the 1970's. I believe you could buy them in rolls and in individual sheets. I am NOT looking for POUCHES, just the clear sheets. I would like to find some either 8X11 page size or on a roll that I can cut with scissors. I also DO NOT want the film that is used with laminating machines.
Oh, and I used to be able to find a type of sticky on one side paper that had silver, shiny color on the other side. If anyone knows where I can get either or both of these types of materials, that would be great!I am seeking clear, self-adhesive laminating sheets (cheap), non-machine, that you can peel off %26amp;stick?
Frisk film is sold in art stores and comes in a tablet of pages. There is also rolls of clear film that you can find in most any department store where they sell shelf liners. The roll is about 2 feet wide and sells for around $8.00. The kind I bought is called contact paper and is easy to cut with scissors.I am seeking clear, self-adhesive laminating sheets (cheap), non-machine, that you can peel off %26amp;stick?
Laminating sheets are readily available in the office section of most stores like Kmart, Wal-Mart and the like. Also in a lot of drug stores like Longs and Walgreen's. I also have found that clear shelf paper work wonders to laminate things and cover books.myspace pictures
Oh, and I used to be able to find a type of sticky on one side paper that had silver, shiny color on the other side. If anyone knows where I can get either or both of these types of materials, that would be great!I am seeking clear, self-adhesive laminating sheets (cheap), non-machine, that you can peel off %26amp;stick?
Frisk film is sold in art stores and comes in a tablet of pages. There is also rolls of clear film that you can find in most any department store where they sell shelf liners. The roll is about 2 feet wide and sells for around $8.00. The kind I bought is called contact paper and is easy to cut with scissors.I am seeking clear, self-adhesive laminating sheets (cheap), non-machine, that you can peel off %26amp;stick?
Laminating sheets are readily available in the office section of most stores like Kmart, Wal-Mart and the like. Also in a lot of drug stores like Longs and Walgreen's. I also have found that clear shelf paper work wonders to laminate things and cover books.
What clear sealer/adhesive would be durable enough to seal in glitter on a pair of shoes?
I'm making a pair of ruby slippers. The first pair I made I used a clear sealer that i think was recommended for sealing acrylic paint. I put down a layer of acrylic paint on the fabric, then sprayed with sealer and pressed glitter in. Then sprayed with sealer again and pressed in more glitter. Then finished with 2 layers of sealer on top. This first pair is adequate but i think the sealer i used doesn't hold too well. the glitter isn't falling off a whole lot but everywhere i go i find a few glitters on the floor but I do like that it dried hard. This second pair I'm making I put down acrylic paint, then some general purpose spray adhesive and pressed glitter into that then sprayed more adhesive and pressed glitter into it and finished with another layer of the adhesive. The adhesive is drying into a gum like stuff. How do I salvage these shoes? If it dries into a gum it will get indented or even get chunks of glitter ripped off. Can I cook the shoes in the oven or set near a heater to make the adhesive hard? I want something clear that i can use as the final layer that will dry hard, hold the glitter in, and be durable enough for the stress of being on a pair of shoes.
i did allow each layer to dry for 24hrs before adding the nextWhat clear sealer/adhesive would be durable enough to seal in glitter on a pair of shoes?
I would let time tell if those shoes will lose their stickiness and dry out or ';cure';. In the future use ';tacky glue'; it is really sticky white glue perfect for you project and then just one good coat of glitter.I wouldn't spray but if you must use clear gloss polyurethane spray. Don't do it in a cold place if you want it to dry well as these things don't dry or apply well under certain temps....put in sun to dry or in a warm WELL VENTILATED PLACE. Sounds like you have been applying glitter too thick with the wrong things for adhesive... too thick. good luckWhat clear sealer/adhesive would be durable enough to seal in glitter on a pair of shoes?
Yes as long as you did not walk in the rain.
i did allow each layer to dry for 24hrs before adding the nextWhat clear sealer/adhesive would be durable enough to seal in glitter on a pair of shoes?
I would let time tell if those shoes will lose their stickiness and dry out or ';cure';. In the future use ';tacky glue'; it is really sticky white glue perfect for you project and then just one good coat of glitter.I wouldn't spray but if you must use clear gloss polyurethane spray. Don't do it in a cold place if you want it to dry well as these things don't dry or apply well under certain temps....put in sun to dry or in a warm WELL VENTILATED PLACE. Sounds like you have been applying glitter too thick with the wrong things for adhesive... too thick. good luckWhat clear sealer/adhesive would be durable enough to seal in glitter on a pair of shoes?
Yes as long as you did not walk in the rain.
Rainbow Glass adhesive clear film???
My mum loves to Glass paint!! She has bought hundrens of pounds worth of glass paint but now she cant find the paper u paint on. We have looked eveywere 4 it!! Its made by these wired guys Alan nd Barry buy they have stopped selling it. We have looked in hobby craft nd at loads of different craft fairs but still none. So i was wondering if anyone on here might know were we can get some?? please help if u do!!Rainbow Glass adhesive clear film???
Hi, I can't remember what you call it. but you can get tranparent film of various thickness. for printing on. Letraset do one type. I used to buy it from Granthams in preston. But any specialist graphic design suppliers should stock it. its very common for mock ups in product/graphic design.
you can also get stuff on a roll. designed for spray painters called low tack.Rainbow Glass adhesive clear film???
Why doesn't she paint on glass.? after all that is what the paint is meant for. Or she could buy acetate sheet as used in drawing animated films these are called cells and possibly from photographic suppliers .This is quite thin ( like thick paper ) She could also get unbreakable acetate sheet from DIY supplies.this would be more like the thickness of glass. Good luck
Hi, I can't remember what you call it. but you can get tranparent film of various thickness. for printing on. Letraset do one type. I used to buy it from Granthams in preston. But any specialist graphic design suppliers should stock it. its very common for mock ups in product/graphic design.
you can also get stuff on a roll. designed for spray painters called low tack.Rainbow Glass adhesive clear film???
Why doesn't she paint on glass.? after all that is what the paint is meant for. Or she could buy acetate sheet as used in drawing animated films these are called cells and possibly from photographic suppliers .This is quite thin ( like thick paper ) She could also get unbreakable acetate sheet from DIY supplies.this would be more like the thickness of glass. Good luck
Clear, self-adhesive photo corner mounts. Where can I find them?
I used some that were given to me a couple years ago. That person isn't around anymore. I thought they came in a roll. Avery may have even been the manufacturer. Does anyone know where I can find these? CLEAR, SELF-ADHESIVE PHOTO CORNER MOUNTS.Clear, self-adhesive photo corner mounts. Where can I find them?
A Google check using: self adhesive photo mount turned up over a million responses. I attached the link to one that my sister uses.Clear, self-adhesive photo corner mounts. Where can I find them?
You're welcome. Thanks for picking my answer. I didn't think my answer was better than Vella's or the others, but I'm glad it helped. If the link made the difference, then I did a good thing. Good luck.
In addition to the above answers, you can also find them at office depot and drug stores like CVS.
Jo-Ann Fabrics.
I goto Hobby Lobby and Micheals a lot for that kinda stuff. And also scrapbooking stores are good to find specialty stuff like that.
Michael's or AC Moore craft store is where I get mine. Any where that sells scrap booking supplies is a good bet. I like to use the corners a lot for displaying photographs of my completed work.
A Google check using: self adhesive photo mount turned up over a million responses. I attached the link to one that my sister uses.Clear, self-adhesive photo corner mounts. Where can I find them?
You're welcome. Thanks for picking my answer. I didn't think my answer was better than Vella's or the others, but I'm glad it helped. If the link made the difference, then I did a good thing. Good luck.
Report Abuse
In addition to the above answers, you can also find them at office depot and drug stores like CVS.
Jo-Ann Fabrics.
I goto Hobby Lobby and Micheals a lot for that kinda stuff. And also scrapbooking stores are good to find specialty stuff like that.
Michael's or AC Moore craft store is where I get mine. Any where that sells scrap booking supplies is a good bet. I like to use the corners a lot for displaying photographs of my completed work.
Is there any clear adhesive ?
im looking for some adhesive that is CLEAR
and perhaps maybe comes in sheets? kind of like double sided tape but like in a sheet because i want to cut a shape out and stick two pieces of glass together
but still have it to be see through... is there anything like that?
i live in california so wher ever you are they prolly have it hereIs there any clear adhesive ?
Try liquid nails. You can buy this at any home improvement store. I use it to glue mosaic glass to window panes.Is there any clear adhesive ?
Go to a place like Fastsigns. They make signs that stick to glass and will have what your looking for.
and perhaps maybe comes in sheets? kind of like double sided tape but like in a sheet because i want to cut a shape out and stick two pieces of glass together
but still have it to be see through... is there anything like that?
i live in california so wher ever you are they prolly have it hereIs there any clear adhesive ?
Try liquid nails. You can buy this at any home improvement store. I use it to glue mosaic glass to window panes.Is there any clear adhesive ?
Go to a place like Fastsigns. They make signs that stick to glass and will have what your looking for.
How can i remove tape (clear heavy duty tape) adhesive from wood?
i have old tape which im trying to remove from a wooden surface. the tape comes off but leaves its sticky residue behind. is there any fast way to scrub of COMPLETELY the residue?How can i remove tape (clear heavy duty tape) adhesive from wood?
goo be gone.is a good product you can buy it at any hardware store.How can i remove tape (clear heavy duty tape) adhesive from wood?
Goo-Gone
220 grit sandpaper...
Try one of those 'magic eraser' pads. Careful to not go out of bounds.
You can also try WD-40. Spray a small amount on the adhesive and rub in with your finger and it should clean it off
It's remarkable what this stuff can do-They even have a list on the web.
myspace pictures
goo be gone.is a good product you can buy it at any hardware store.How can i remove tape (clear heavy duty tape) adhesive from wood?
Goo-Gone
220 grit sandpaper...
Try one of those 'magic eraser' pads. Careful to not go out of bounds.
You can also try WD-40. Spray a small amount on the adhesive and rub in with your finger and it should clean it off
It's remarkable what this stuff can do-They even have a list on the web.
Decal Printing: Where can I buy clear adhesive vinyl suitable for indoor and outdoor use.?
I want to use an ink-jet printer to print decals.Decal Printing: Where can I buy clear adhesive vinyl suitable for indoor and outdoor use.?
here are some prices, for the clear adhesive backed vinyl.
20 sheets 8.5'; x 11'; Adhesive-Backed Clear Vinyl
Price: $22.23
20 sheets 11'; x 17';Adhesive-Backed Clear Vinyl
Price: $51.34
20 sheets 13'; x 19';Adhesive-Backed Clear Vinyl
Price: $58.61
20 sheets 17'; x 22';Adhesive-Backed Clear Vinyl
Price: $89.10
Here is some prices for Ink Jet Adhesive Backed Vinyl
Ink Jet Adhesive Backed Vinyl 8.5'; x 11'; 25 Sheets $.80 per sheet $20.00
Ink Jet Adhesive Backed Vinyl 8.5'; x 11'; 50 Sheets $.70 per sheet $35.00
Ink Jet Adhesive Backed Vinyl 8.5'; x 11'; 100 Sheets $.65 per sheet $65.00
here are some prices, for the clear adhesive backed vinyl.
20 sheets 8.5'; x 11'; Adhesive-Backed Clear Vinyl
Price: $22.23
20 sheets 11'; x 17';Adhesive-Backed Clear Vinyl
Price: $51.34
20 sheets 13'; x 19';Adhesive-Backed Clear Vinyl
Price: $58.61
20 sheets 17'; x 22';Adhesive-Backed Clear Vinyl
Price: $89.10
Here is some prices for Ink Jet Adhesive Backed Vinyl
Ink Jet Adhesive Backed Vinyl 8.5'; x 11'; 25 Sheets $.80 per sheet $20.00
Ink Jet Adhesive Backed Vinyl 8.5'; x 11'; 50 Sheets $.70 per sheet $35.00
Ink Jet Adhesive Backed Vinyl 8.5'; x 11'; 100 Sheets $.65 per sheet $65.00
I have a CF hood that I am clearing. I am using acrylic clear. Do I need adhesive promoter?
Last time I used acrylic it dried rough and it wasnt smooth. the only clear I can find is acrylic. It could have been too hot and I might have not sprayed enough/too far away. Should I use adhesive promoter or what should I use?I have a CF hood that I am clearing. I am using acrylic clear. Do I need adhesive promoter?
I'm assuming you are painting over a painted surface already coated with a urethane so yes, use an adhesion promoter because polyurethane coatings have terrible recoat properties. Pick an adhesion promoter that is recommended by the manufacturer of the paint you are using. Also, remember to paint in a low humidity environment.
If you really want it to look good, take it to a paint shop like maaco or something and have them spray it with a clear coat of polyurethane. Acrylic lacquer like what you're about to use will disintegrate (cracks, yellowing, etc...) in a comparatively short period of time.
I'm assuming you are painting over a painted surface already coated with a urethane so yes, use an adhesion promoter because polyurethane coatings have terrible recoat properties. Pick an adhesion promoter that is recommended by the manufacturer of the paint you are using. Also, remember to paint in a low humidity environment.
If you really want it to look good, take it to a paint shop like maaco or something and have them spray it with a clear coat of polyurethane. Acrylic lacquer like what you're about to use will disintegrate (cracks, yellowing, etc...) in a comparatively short period of time.
Would like to find optical grade clear blue adhesive vinyl film?
i know of a blue film used to mount thin samples for dicing (like silicon wafers or glass slides and such). that might work for you too.
http://www.semicorp.com/products/highPur鈥?/a>
:-)
http://www.semicorp.com/products/highPur鈥?/a>
:-)
Need a clear and strong adhesive for cellophane please help tyty?
I put together a project with cellophane. I used art paste but i think i might like to have another adhesive over it and under it. Does anyone know which adhesive would be great for keeping (slippery) cellophane glued in place, while drying clear?? I am thinking decopauge or elmers glue with water mixed in....any ideas?? would hai rspary work??tytytytyNeed a clear and strong adhesive for cellophane please help tyty?
Pepatong,
Elmer's glue, or similar glues would work for a limitled period of time. Decopauge could work, too, maybe for even a little longer. Glues like Liquid Nails or similar would work for very long times. You get those in hardware stores.
Pepatong,
Elmer's glue, or similar glues would work for a limitled period of time. Decopauge could work, too, maybe for even a little longer. Glues like Liquid Nails or similar would work for very long times. You get those in hardware stores.
I need to know what kind of glue or adhesive I can use that dries very fast and clear.?
I'm planning to attach Christmas tree lights to a dead branch.I need to know what kind of glue or adhesive I can use that dries very fast and clear.?
E-6000. It dries in a few minutes, is clear and holds forever. I used it to glue beer bottle caps onto the wood of my garden shed and they are there forever. It also won't melt in the sun and can stand cold temps well below freezing. You can find it at craft stores.I need to know what kind of glue or adhesive I can use that dries very fast and clear.?
Super glue would be the obvious choice, because it is the first thing you think of when people say ';fast drying glue.'; For your project, though, I would use a glue gun. Go to your local craft store and ask for a glue gun. They have some really cheap ones.
I love Gorilla Glue
Yup Super Glue can be a solution, but what if you want to store your xmas lights again? you'll have to store the branch as well :), what I sugest you is to use simple and common Plastic Wire Ties, like the one you use to close plastic bags and stuff ...why? because they'll hold long time and you can deattach your lights, store it again and get rid of the branch as well, good luck!!!
Try some Araldite 5 minute glue , it is strong drys clear and easy to use. just mix equel parts and apply
super glue
super glue dries way too fast. i would use a hot glue gun, but practice a bit before, because it can get pretty messy and you end up with gobs and gobs of extra glue.
rubber cement may work as well, but im more confident with glue gun.
I was gonna say super glue
E-6000. It dries in a few minutes, is clear and holds forever. I used it to glue beer bottle caps onto the wood of my garden shed and they are there forever. It also won't melt in the sun and can stand cold temps well below freezing. You can find it at craft stores.I need to know what kind of glue or adhesive I can use that dries very fast and clear.?
Super glue would be the obvious choice, because it is the first thing you think of when people say ';fast drying glue.'; For your project, though, I would use a glue gun. Go to your local craft store and ask for a glue gun. They have some really cheap ones.
I love Gorilla Glue
Yup Super Glue can be a solution, but what if you want to store your xmas lights again? you'll have to store the branch as well :), what I sugest you is to use simple and common Plastic Wire Ties, like the one you use to close plastic bags and stuff ...why? because they'll hold long time and you can deattach your lights, store it again and get rid of the branch as well, good luck!!!
Try some Araldite 5 minute glue , it is strong drys clear and easy to use. just mix equel parts and apply
super glue
super glue dries way too fast. i would use a hot glue gun, but practice a bit before, because it can get pretty messy and you end up with gobs and gobs of extra glue.
rubber cement may work as well, but im more confident with glue gun.
I was gonna say super glue
Can transparent self adhesive printing paper be used instead of clear decal film?
I am making my own police decals and i thought if i could use self adhesive printing paper instead of decal film?Can transparent self adhesive printing paper be used instead of clear decal film?
No it will not work. With self adbesive paper the printed side faces out. THe first sign of moisture or light will have those labels looking terrible.myspace pictures
No it will not work. With self adbesive paper the printed side faces out. THe first sign of moisture or light will have those labels looking terrible.
I need to print clear, adhesive labels at home...?
im looking to print/ produce my own lables for small glass bottles. the lables need to be adhesive( strong adhesive needed) and clear, and will be very small, about 1'; circle around or 1'; square. i would like to be able to print high quality fonts and graphics in full color. cost is NO object... if you know anything about this stuff, please answer back with brands or models that i can look up online. THANKSI need to print clear, adhesive labels at home...?
You should print one that says ';D!ckhead'; and put it on your head.I need to print clear, adhesive labels at home...?
Any computer store should carry the clear label material. (You may need to trim it after printing if you can't find sheets with the size labels you want.) All I've found is for inkjet printers only. I haven't found any that works with color laser printers, although I've been told there is some out there.
If you want it to be a really permanent label, spray a thin coat of clear paint/laquer over it. (The same technique as used in decoupage.) This will not only stick the labels down better, but will keep the ink from rubbing off.
You should print one that says ';D!ckhead'; and put it on your head.I need to print clear, adhesive labels at home...?
Any computer store should carry the clear label material. (You may need to trim it after printing if you can't find sheets with the size labels you want.) All I've found is for inkjet printers only. I haven't found any that works with color laser printers, although I've been told there is some out there.
If you want it to be a really permanent label, spray a thin coat of clear paint/laquer over it. (The same technique as used in decoupage.) This will not only stick the labels down better, but will keep the ink from rubbing off.
What can get rid this adhesive that is on the clear, thin plastic protector of a picture frame (see details)?
You know the plastic that goes over a picture, that protects it.
It had the packaging material glued to it. I can't get the glue off it. It's slightly sticky, a dark brownish yellow color.
I've tried peanutbutter and glass cleaner on it. Did not work.What can get rid this adhesive that is on the clear, thin plastic protector of a picture frame (see details)?
If you put peanut butter on a paper towel and rub the glue with that, it will come off with rubbing over it but not without a little effort. It does work. I use it all the time.What can get rid this adhesive that is on the clear, thin plastic protector of a picture frame (see details)?
Goo be gone
try goo gone
Try toothpaste or mayonnaise, one of them should work.
100% pure silicone spray (hrdwr store), it will melt the adhesive without staining.
rubbing alcohol or baby oil will take it off
Stuff called Goo Gone, available from Target, Wal-Mart and other such places.
rubbing alcohol or lighter fluid
It had the packaging material glued to it. I can't get the glue off it. It's slightly sticky, a dark brownish yellow color.
I've tried peanutbutter and glass cleaner on it. Did not work.What can get rid this adhesive that is on the clear, thin plastic protector of a picture frame (see details)?
If you put peanut butter on a paper towel and rub the glue with that, it will come off with rubbing over it but not without a little effort. It does work. I use it all the time.What can get rid this adhesive that is on the clear, thin plastic protector of a picture frame (see details)?
Goo be gone
try goo gone
Try toothpaste or mayonnaise, one of them should work.
100% pure silicone spray (hrdwr store), it will melt the adhesive without staining.
rubbing alcohol or baby oil will take it off
Stuff called Goo Gone, available from Target, Wal-Mart and other such places.
rubbing alcohol or lighter fluid
What is the best clear lace wig bonding adhesive?
I am having a hard time finding one that will not show. I am spending way too much money and it looks horrible. all i want is one that does not show around the edges when i put it on.What is the best clear lace wig bonding adhesive?
Your application process could be flawed if your glue is always showing. Does this mean you have already tried clear glue such as Ultra Hold? Most of the white glues in the U.S also dry clear. Make sure you are doing a proper clean up after you put on your unit. Go around your edges and hairline with a cotton ball soaked in 90%+ Alcohol, or a non oily adhesive remover such as PURE. Also, if you are also using tape in conjunction with your glue, make sure to only use it on the sides and back of your unit because when it dries it leaves a shine. Hope this helps!
Your application process could be flawed if your glue is always showing. Does this mean you have already tried clear glue such as Ultra Hold? Most of the white glues in the U.S also dry clear. Make sure you are doing a proper clean up after you put on your unit. Go around your edges and hairline with a cotton ball soaked in 90%+ Alcohol, or a non oily adhesive remover such as PURE. Also, if you are also using tape in conjunction with your glue, make sure to only use it on the sides and back of your unit because when it dries it leaves a shine. Hope this helps!
Which laser jet printer is best for printing clear vinyl adhesive paper for small decals?
Most any laserjet printer will work fairly well. The best kind would probably be one that had a way to run the paper through the printer in a straight path rather than have it make turns internally, this will help keep the decals from peeling off inside the printer when it makes turns in the paper path. Make sure to use paper stock that is rated for laser printers to avoid any fusing problems and follow any of the paper manufacturers recommendations about setting the printer's fuser settings if any. Newer printers have fuser settings just for label stock so that the temperature settings are appropriate.
Best of luck.Which laser jet printer is best for printing clear vinyl adhesive paper for small decals?
I don't think this is a good idea as the vinyl will burn and damage the fuser
Best of luck.Which laser jet printer is best for printing clear vinyl adhesive paper for small decals?
I don't think this is a good idea as the vinyl will burn and damage the fuser
Anyone know if its possible to buy a Clear Non Adhesive plastic tax or permit disc holder?
Im looking for a really basic tax disc or permit holder a plastic one which doesnt have any sticky adhesive or anything the kind that u lick or just needs a bit a water to sit against the window.
so that it doesnt leave any marks in the window when i remove it.
tried ebay and had a word with my local halfords but they only had metal things .
Thanks in advanceAnyone know if its possible to buy a Clear Non Adhesive plastic tax or permit disc holder?
the local post office should sell them...after all, that's where you buy your tax disc from in the first place! they should cost less than a pound to buy.
so that it doesnt leave any marks in the window when i remove it.
tried ebay and had a word with my local halfords but they only had metal things .
Thanks in advanceAnyone know if its possible to buy a Clear Non Adhesive plastic tax or permit disc holder?
the local post office should sell them...after all, that's where you buy your tax disc from in the first place! they should cost less than a pound to buy.
Where can I buy rolls of clear, self-adhesive laminating film ?
I am building some board games, and whilst I have a heat based laminate machine for laminating thin sheets, I would like to put a laminating surface over the actual boards themselves.
The boards are roughly A2 in size, and someone suggested covering them in self-adhesive laminate - but I am having trouble find this in the UK stores I have checked.Where can I buy rolls of clear, self-adhesive laminating film ?
Try Tesco since they are owned by Wal-Mart, which sells it in the US, there are several kinds available. They stock it in
the shelf liner, cleaning product section of the store.
Good Luck!Where can I buy rolls of clear, self-adhesive laminating film ?
office max , office depot,a.c.more any computer ,office supplies,or arts and crafts placemyspace pictures
The boards are roughly A2 in size, and someone suggested covering them in self-adhesive laminate - but I am having trouble find this in the UK stores I have checked.Where can I buy rolls of clear, self-adhesive laminating film ?
Try Tesco since they are owned by Wal-Mart, which sells it in the US, there are several kinds available. They stock it in
the shelf liner, cleaning product section of the store.
Good Luck!Where can I buy rolls of clear, self-adhesive laminating film ?
office max , office depot,a.c.more any computer ,office supplies,or arts and crafts place
Clear adhesive glass to wood?
I'm doing a tray with photographs and want to attach glass onto the wood with a clear adhesive, does someone know what I can use?Clear adhesive glass to wood?
100% rtv silicone adhesive, dries clear, waterproof, lasts forever, easy cleanup, in expensive and readily available in most hardware outlets
100% rtv silicone adhesive, dries clear, waterproof, lasts forever, easy cleanup, in expensive and readily available in most hardware outlets
How do i remove clear adhesive tape from a tinted glass window?
my window got changed and now the remnants of the tape remain...How do i remove clear adhesive tape from a tinted glass window?
Goo gone works wonders and you can find it at walmart for like $2How do i remove clear adhesive tape from a tinted glass window?
use the goo gone by far works the best, won't harm the tint
Mineral Spirits removes addesives
alchohol or adhesive remover you can get that at an auto parts store
I'm told W-D 40 is good for a lot of things like this.
The simplest and most effective I can suggest is that you pour out some of your 'nail polish remover' onto a piece of cotton or tissue and just clean it up. It always works and in your case you do not have to go anywhere.
if the window are factory tinted you can use a razor blade but if it is and on tint to the windows don't do it ...
Goo gone works wonders and you can find it at walmart for like $2How do i remove clear adhesive tape from a tinted glass window?
use the goo gone by far works the best, won't harm the tint
Mineral Spirits removes addesives
alchohol or adhesive remover you can get that at an auto parts store
I'm told W-D 40 is good for a lot of things like this.
The simplest and most effective I can suggest is that you pour out some of your 'nail polish remover' onto a piece of cotton or tissue and just clean it up. It always works and in your case you do not have to go anywhere.
if the window are factory tinted you can use a razor blade but if it is and on tint to the windows don't do it ...
What is the safest way to isolate 2 pcs of glass attached to each other using optically clear adhesive?
I am dealing with a glass touch panel that is fused with a another glass panel and they are fused with optically clear adhesive. Since both parts are fragile, i do not want to accidentally break either of them so need some help on how to remove them safely off each other. Would appreciate any tips and info.thanksWhat is the safest way to isolate 2 pcs of glass attached to each other using optically clear adhesive?
It would depend of course on the nature of the adhesive, but it sounds like soaking them in a hydrocarbon solvent like xylene or toluene might be the best bet. Acetone might do it for some adhesives, but in general hydrocarbons are broader range adhesive solvents.
It would depend of course on the nature of the adhesive, but it sounds like soaking them in a hydrocarbon solvent like xylene or toluene might be the best bet. Acetone might do it for some adhesives, but in general hydrocarbons are broader range adhesive solvents.
What is the ';actual'; name for the clear adhesive thats gummy thats holds products into gift baskets?
Similar to the baskets that Wal Mart sells with bath and body products hooked into baskets. The adhesive is clear, gummy and removes off the product easily. Please help I am putting together gift baskets and want the items to stay in place. Also, where can I find this stuff?What is the ';actual'; name for the clear adhesive thats gummy thats holds products into gift baskets?
Its a type of glue that soft sets-- ergo it's called soft-set glue
Its a type of glue that soft sets-- ergo it's called soft-set glue
What is the clear adhesive credit card companies use to stick credit cards to? It looks like a reusable goop.?
When you get your credit card, you remove it from the paper backing only to find some sort fo adhesive there. What's awesome is that you could remove the adhesive from thec ard and the piece of paper without damaging the paper itself. I kind of need the adhesive for a project.What is the clear adhesive credit card companies use to stick credit cards to? It looks like a reusable goop.?
i don't think it is exactly rubber cement they use that on bike tires to patch holes and what your talking about would not work you should probably go to an office supply store in your area to see if the have it like staples or office max, or maybe try the post office they might have something of that sort or could tell you who good luck.What is the clear adhesive credit card companies use to stick credit cards to? It looks like a reusable goop.?
old fashion rubber cemet
you can find it in drug stores, hardware stores,grocery stores!
Rubber cement. You can by it at any office supply store. I enjoyed huffing it as a child stuck in class. Then they took it away and replaced it with non-toxic, oddorless glue sticks.
i don't think it is exactly rubber cement they use that on bike tires to patch holes and what your talking about would not work you should probably go to an office supply store in your area to see if the have it like staples or office max, or maybe try the post office they might have something of that sort or could tell you who good luck.What is the clear adhesive credit card companies use to stick credit cards to? It looks like a reusable goop.?
old fashion rubber cemet
you can find it in drug stores, hardware stores,grocery stores!
Rubber cement. You can by it at any office supply store. I enjoyed huffing it as a child stuck in class. Then they took it away and replaced it with non-toxic, oddorless glue sticks.
Subscribe to:
Comments (Atom)